GL Technologies GL.iNet Slate GL-AR750S-Ext User Manual

1) Cable
Connect the router to the modem or the main router via Ethernet cable to access the Internet.
Before plugging the Ethernet cable into the WAN port of the router, you can click Use as LAN to set the
WAN port as a LAN port. That is useful when you are using the router as a repeater. As a result, you can
have one more LAN port.

Plug the Ethernet cable into the WAN port of the router. The information of your connection will be shown
on the Cable section. DHCP is the default protocol. You can click Modify to change the protocol.

GL Technologies GL.iNet Slate GL-AR750S-Ext Specifications

General

Brand	GL Technologies
Model	GL.iNet Slate GL-AR750S-Ext
Category	Wireless Router
Language	English