To Next PageTo Next PageWhy is the handle hard to turn on my Glacier bay 1002910927 Bathroom Fixtures?
If the handle is hard to turn, the bonnet nut may be too tight. Loosen the bonnet nut and reinstall it, being careful not to overtighten it.
How to fix leaking or dripping from the spout when the handle is closed in Glacier Bay Bathroom Fixtures?
If there is leaking or dripping from the spout when the handle is closed, it may be that the grommets are not sealing properly. Replace the cartridge.
What to do if there is no flow or a low water flow in my Glacier bay 1002910927?
If you experience no flow or low water flow, it might be that one or both water supplies are not turned on. Turn both water supply valves counterclockwise to the on position.
General| Brand | Glacier bay |
|---|---|
| Model | 1002910927 |
| Category | Bathroom Fixtures |
| Language | English |
Before installation, ensure all parts are present and compare with the Package Contents list.
Lists tools and hardware needed for installation, including various pipe connection methods.
Lists all parts included in the package with their descriptions and quantities for verification.
Instructions on shutting off water, verifying hole sizes, and checking water pressure before installation.
Steps for connecting hot and cold water supply lines to the valve body, using thread sealant tape.
Instructions for connecting shower and tub outlet pipes and pipe elbows, with specific notes for shower-only setup.
Procedures for flushing water lines and checking all connections for leaks after installation.
Steps for installing the shower arm, flange, and shower head, including tightening with a strap wrench.
Instructions for connecting the tub spout outlet pipe and attaching the tub spout to the wall.
Steps for positioning flanges and attaching handles using the provided hex wrench.
