8
Complete the Assembly
Make sure there is a bolt or screw in each hole of the cabinet frame.
Move the cabinet to its nal location.
Place a level on the inside shelf, and if necessary, level the cabinet by adjusting the height of the leveling legs (P7). Turn to the left to
raise or to the right to lower the leveling leg.
If the doors are not aligned, loosen all the screws attaching the door hinge to the cabinet.
Adjust door to the desired height, and fully tighten the screws.
ACCESSORIES
To order accessories, call 1-866-342-4089 and ask for the accessory part number listed below or contact your authorized Gladiator
®
brand dealer. In Canada, call 1-800-807-6777.
Caster Kit
Order Part # GACK04KDSX
Modular Hardwood Top
Order Part # GAAC28HWGX
To Next Page
Loading...
Need help?
General
