WWW.GLADIATORPADDLEBOARDS.COM INFO@GLADIATORPADDLEBOARDS.COM
GLADIATOR PADDLEBOARDS USER GUIDE
THE FINS
Now your board is inated, you’re nearly ready to hit the water. Let’s just get your n sorted.
US BOX FIN
Remove n bolt from n and
lightly screw the bolt into the
nut. Put the nut in the track at
the wide-point in the centre of
the n box and slide it towards
the front of the board using the
bolt. Remove the bolt.
Put the end of the n into the
track (the non-n bolt end).
Slide the n along the track
and line up the hole in the end
of the n with the nut. Screw
the bolt in by hand. At the end
of your session remove the
n by reversing this process
(be careful not to lose your n
bolt!). Store the n bolt in the
n.
To Next Page
Loading...
Need help?
General