39
1. Turn crank anticlockwise until the
sunshade is completely closed
2. Squeeze the Tilt handle, pull down
Closing the sunshade
3
Keep the sunshade as compact as
possible.
!
1. Pull out / wrap fabric segments
2. Secure the sunshade with ribbons
3. Lift the protective cover above the
sunshade section
4. Close the protective cover
Bind/protect the sunshade
4
To extend the service life of the cover-
ing material, GLATZ strongly recom-
mends the use of a protective sleeve
when the sunshade is closed.
!
4.3
4.1
4.2
1. Squeeze the Tilt handle, adjust until
the desired inclination is reached
2. Step on the pedal
3. Turn the sunshade to the
requested position
Positioning of the sunshade
2
360°
2.3
2.2
2.1
3.1
3.2
To Next Page
Loading...
