38
Use
Carriage / supporting arm / tilt handle
Cover
Base (optional)
Crank
Swivel base / pedal
Ribs
Mast
1
1. Remove protective cover
2. Loosen ribbons
3. Release the carriage by means of the
tilt handle and push it upwards
4. Completely open the sunshade
through use of the crack
5.
Make sure that the inner parts are engaging
Opening the sunshade
The sunshade will be automatically
aligned horizontally. For safe
operation, the inner parts must be
completely engaged.
!
Ribbons
1.5
1.4
To Next Page
Loading...
