2726
Installation and start-up
Supplied with:
- Parasol
- Crank (2x)
- Binding (only for material class 5)
- Protective cover
- Operating instructions
Unpacking the parasol
1
Dispose of packaging material prop-
erly and keep away from children.
Do not make use of defective ma-
terial. In the event of any damage,
inform the transport service provider
immediately.
!
2×
1. Put the cranks in place and
screw tightly.
Pre-assemble parasol
4
1. Put the pole up and place it into its
anchorage system (ground socket/
base).
Place shade
5
* maximal wind speed with xed ground
anchorage
Size
[cm]
Base weight
[kg]
Wind speed*
[km/h (Bft.)]
ø 300 90 35 (5)
ø 330 90 30 (5)
300 x 240 90 35 (5)
270 x 270 90 30 (5)
3
Place the oor fastening in accordance
with the separate instructions.
Prepare the oor fastening
2
Placing the parasol down
Carefully place the parasol on a
clean, horizontal surface. The parasol
is very heavy. Work in a threesome
and hold the parasol securely.
!
To Next Page
Loading...
