Glendale GL1152 - Assembly Instructions; Step 1 & 2: Connecting Upright Leg and Foot Plate; Step 3 & 4: Adding Frame Supports

Page | 3
Assembly Instructions
Step 1 & 2
Connect the upright leg (1)
With the foot plate part (10)
Add clip (14) to the top of the
leg and to all the pre-drilled
legs as shown
Do not over tighten the
screws at this stage
Step 3 & 4
Add the cross supporting
members by connecting
using inserts G & F
Add the supporting side parts
(5)
And add the curtain tracking
bar to the inside of the frame
If you need help with assembly or missing parts please call our customer care team on: 0121 619 1939