Glide Gear DST 50 - Assembly; Table;Desk Configuration

Assembly
Table/Desk conguraon:
The DST 50 can be mounted into 2 dierent conguraons:
• Mount onto a C-Stand. The DST 50 does not come with a C-Stand.
• Mount onto a table/desk using the supplied Table Clamp (B)
1
• Mount the Table Clamp (B) to the table or desk you would like to use by
ghtening the screw at the boom of the clamp as shown in Fig.1 .
• Slide the Main Telescopic Pole (A) onto the peg on top of the
Table Clamp (B).
• Using the Locking Screw (D), secure the Main Telescopic Pole (A) to the
peg as in shown in Fig. 2.
Fig.1
Fig.2
For more informaon please visit our website: www.glidegear.net