Glide Gear DST 50 - C-Stand Configuration; Adjusting Main Telescopic Height

Assembly, Cont’d
C-Stand conguraon:
• Slide the Main Telescopic Pole (A) onto your C-Stand as in Fig. 3.
• Using the Locking Screw (D), secure the Main Telescopic Pole (A) to
the C-Stand.
2
Adjust the height of the Main Telescopic (A) by loosening and
ghtening the pole clamp connecng the 2 telescopic poles
as shown in Fig. 4.
Fig.3
Fig.4
For more informaon please visit our website: www.glidegear.net