Glide G2 Series User Manual

7
Section 8
Wheels
The large wheels are fitted with sealed bearings and should last many years without
replacement.
Large wheels (fixed)
• To remove large wheels unscrew locknut and using a large screwdriver unscrew the
axle and remove when free.
• Installation in the reverse procedure.
Large wheels (quick release)
• To remove large wheels (quick release) push button in and slide wheel out while button
is still depressed.
• To install push button in and slide wheel in.
• Wheels should be removed weekly and axles and sockets wiped clean with a soft cloth
to avoid jamming in the socket. Smear axle with dri-lube stick before replacing.
Warning
• Do not use wheelchair, unless button is fully out when wheels are in place.

Glide G2 Series Specifications

General

Brand	Glide
Model	G2 Series
Category	Wheelchair
Language	English