Need help?Do you have a question about the GLITZHOME Console Table and is the answer not in the manual?
Includes cautions on adult assembly, tool usage, item inspection, and warnings regarding sharp objects, children, tightening, and damage.
Guidance on avoiding scratches, using mild soap for cleaning, and periodically checking fittings for tightness.
Lists of all components and hardware required for assembly, including quantities and specifications.
Connect the Base Panel (C) to the Legs (B) using Bolt Locks (F), Spring Washers (K), Flat Washers (J), and Spanner (G).
Secure the Connecting Bar (D) to the Legs (B) using Allen Bolts (H) and the Allen Key (I).
Fasten the Top Panel (A) to both Legs (B) using Phillips Screws (E).
Attach steel plates (P) to the top panel (A) and secure the unit to the wall using screws (L, O), wall anchors (N), and anti-tipping strips (M).
This document provides assembly instructions for a console table, manufactured by Glitzhome Corporation (Shanghai), Ltd.
The console table is a piece of furniture designed for placement against a wall, typically in an entryway, living room, or hallway. It features a top panel, a base panel, and supporting legs, with connecting bars for structural stability. The table is intended to provide a surface for decorative items, lamps, or other small objects, and its design often incorporates aesthetic elements that complement interior decor. The assembly process involves attaching the base panel to the legs, securing connecting bars between the legs, and finally attaching the top panel. An important safety feature included is an anti-tipping mechanism, which involves securing the table to a wall to prevent accidental tipping, especially in households with children or pets.
The console table is designed for indoor use. Its primary function is to serve as a decorative and functional surface in various rooms. The assembly instructions emphasize the importance of careful unpacking and identification of all components before starting assembly to ensure all parts are present. The assembly process is broken down into four distinct steps, each with clear visual aids and hardware specifications.
Step 1: Attaching the Base Panel to the Legs. This step involves securing the Base Panel (C) to the Legs (B) using Bolt Locks (F), Spring Washers (K), Flat Washers (J), and the Spanner (G). This establishes the foundational structure of the table.
Step 2: Fixing the Connecting Bars. The Connecting Bar (D) is attached to the Legs (B) using Allen Bolts (H) and the Allen Key (I). These bars enhance the stability and rigidity of the table's frame.
Step 3: Attaching the Top Panel. The Top Panel (A) is secured to both Legs (B) using Phillips Screws (E). This completes the main structure of the table, providing its primary surface.
Step 4: Implementing the Anti-Tipping Mechanism. This crucial safety step involves attaching a Steel Plate (P) to the top panel (A) with a Phillips Screw (L) using a screwdriver. The assembled unit is then placed in its desired position, and the location of the steel plate on the wall is marked. The unit is removed, a hole is drilled in the wall, and a Wall Anchor (N) is inserted. The Steel Plate (P) is then attached to the Wall Anchor (N) with a Phillips Screw (O). Finally, the unit is placed back into position, and the Anti-Tipping Strip (M) is attached to the steel plates (P) as shown in the diagram. This mechanism is vital for preventing the table from tipping over, ensuring safety, particularly in environments with children or pets.
The manual provides clear guidelines for the care and maintenance of the console table to ensure its longevity and appearance.
The Glitzhome console table is designed for straightforward assembly and offers a practical and aesthetic addition to home interiors, with a strong emphasis on safety through its anti-tipping feature.
General| Brand | GLITZHOME |
|---|---|
| Model | Console Table |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
