This document provides assembly instructions for a console table, manufactured by Glitzhome Corporation (Shanghai), Ltd.

Function Description:

The console table is a piece of furniture designed for placement against a wall, typically in an entryway, living room, or hallway. It features a top panel, a base panel, and supporting legs, with connecting bars for structural stability. The table is intended to provide a surface for decorative items, lamps, or other small objects, and its design often incorporates aesthetic elements that complement interior decor. The assembly process involves attaching the base panel to the legs, securing connecting bars between the legs, and finally attaching the top panel. An important safety feature included is an anti-tipping mechanism, which involves securing the table to a wall to prevent accidental tipping, especially in households with children or pets.

Important Technical Specifications:

Parts List:

TOP PANEL (A): Qty: 1
LEG (B): Qty: 2
BASE PANEL (C): Qty: 1
CONNECTING BAR (D): Qty: 1

Hardware List:

PHILLIPS SCREW (E): M4 x 16MM, Qty: 6
BOLT LOCK (F): Qty: 4
SPANNER (G): Qty: 1
ALLEN BOLT (H): M6 x 12MM, Qty: 4
ALLEN KEY (I): Qty: 1
FLAT WASHER (J): Qty: 4
SPRING WASHER (K): Qty: 4
PHILLIPS SCREW (L): Ø4*12mm, Qty: 1
ANTI-TIPPING STRIP (M): 5*200mm, Qty: 1
WALL ANCHOR (N): Ø8.5*30mm, Qty: 1
PHILLIPS SCREW (O): 4*25mm, Qty: 1
STEEL PLATE (P): 221920mm, Qty: 2

Usage Features:

The console table is designed for indoor use. Its primary function is to serve as a decorative and functional surface in various rooms. The assembly instructions emphasize the importance of careful unpacking and identification of all components before starting assembly to ensure all parts are present. The assembly process is broken down into four distinct steps, each with clear visual aids and hardware specifications.

Step 1: Attaching the Base Panel to the Legs. This step involves securing the Base Panel (C) to the Legs (B) using Bolt Locks (F), Spring Washers (K), Flat Washers (J), and the Spanner (G). This establishes the foundational structure of the table.

Step 2: Fixing the Connecting Bars. The Connecting Bar (D) is attached to the Legs (B) using Allen Bolts (H) and the Allen Key (I). These bars enhance the stability and rigidity of the table's frame.

Step 3: Attaching the Top Panel. The Top Panel (A) is secured to both Legs (B) using Phillips Screws (E). This completes the main structure of the table, providing its primary surface.

Step 4: Implementing the Anti-Tipping Mechanism. This crucial safety step involves attaching a Steel Plate (P) to the top panel (A) with a Phillips Screw (L) using a screwdriver. The assembled unit is then placed in its desired position, and the location of the steel plate on the wall is marked. The unit is removed, a hole is drilled in the wall, and a Wall Anchor (N) is inserted. The Steel Plate (P) is then attached to the Wall Anchor (N) with a Phillips Screw (O). Finally, the unit is placed back into position, and the Anti-Tipping Strip (M) is attached to the steel plates (P) as shown in the diagram. This mechanism is vital for preventing the table from tipping over, ensuring safety, particularly in environments with children or pets.

Maintenance Features:

The manual provides clear guidelines for the care and maintenance of the console table to ensure its longevity and appearance.

Care and Cleaning:

DO NOT scratch or chip the finish of the product.
DO NOT use abrasive chemicals for cleaning.
Clean the table with mild soap on a soft rag.
Rinse and dry thoroughly after cleaning.

General Maintenance:

Periodically check all fittings and re-tighten them as necessary to maintain structural integrity.
After initial assembly, the product may acclimate to its new environment. It is recommended to ensure all screws are securely tightened after this initial period.

Safety Precautions during Assembly:

Assembly requires at least two adults.
DO NOT use power tools for assembly.
Inspect all items BEFORE assembly.
If returning the item, ensure it is in its original packaging.
DO NOT let any sharp objects touch or rub the surface of the product.
Keep children away from the working area during assembly.
DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up. This allows for minor adjustments during assembly.
DO NOT USE the product if it becomes damaged, and/or components are broken or missing.

The Glitzhome console table is designed for straightforward assembly and offers a practical and aesthetic addition to home interiors, with a strong emphasis on safety through its anti-tipping feature.

GLITZHOME Console Table - Assembly Step 2; Fix Connecting Bar; Assembly Step 3; Attach Top Panel

Related product manuals