Globalsat DG-388 - DG-388 PC Tool Operation; PC Tool Function

9
5. DG-388 PC Tool Operation
5.1 PC Tool Function
Loading the
recorded data
Load the traveled path data into PC and save it
Saving data into
different format
(1) KML format for Google Earth
(2) GPX format file
(3) CSV format file
(4) GSX format file
Device Setting
Data logging
method
Time
Use time as data logging unit. If you select
'1' Sec in Time, it will record data every second.
Distance
Use distance as data logging unit. If you fill '25'
meters, it will record a path data every 25 meters.
speed
Use speed zone selection to record data. Our
default max speed limit is 100 and low speed limit
is 60.
If you select 'medium', it will record speed data
which is between 60 to 100 km/h. If you select
'low', it will record speed data lower than 60 km/h.
If you select 'high', it will record speed data
greater than 100 km/h.
Data logging
setting
Time
1 / 5 / 10 Sec
Distance
setting(meter)
25
(range: 25~10k meters)
Speed zone
low / medium / high
Max speed
limit (km/h)
100 km/h
(range: 1~300 km/h)
Low speed
limit (km/h)
60
(range: 1~300 km/h)
Other setting
Motion
detection
Off/on
If you select 'off', it will record data all the time.
If you select 'on', it will go to power saving mode
when detecting no movement for 300 seconds.
GPS static
On/off
If you select 'on', it will show path data at the