8
5 UNFOLD THE SCOOTER
1. Pull the steering column up while pressing
down the rear wheel fender.
2. Unfold the steering column, lock the
safety latch, and slide the xing ring over the
safety latch.
3. Fix the brake lever with hex wrench (M5
supplied).
4. Tighten the handles onto the handlebars
(pay attention to the direction of rotation
when tightening).
5. Depending on the vibration experienced by
the steering column, correctly adjust the screw
of the safety latch.
6 FOLDING THE SCOOTER
1. Slide the xing ring to the left. 2. Open the safety latch. 3. Lower the steering column.
4. Align the hook with the hole in the rear fender and
press down to lock the scooter in the folded position.
Your electric scooter is now ready to be stored or
transported.
Be careful when folding and unfolding to not pinch your ngers.
ENGLISH
To Next Page
Loading...
