24
- Push “Up” or “Down” to set up the desired power.
- Choose the intensity level between the 9 avaiable ones.
- To switch off the device lead the intensity level to the 0
level and push “Down”
- To change the default settings push the “Set” button one
time, the “Timer” will
flashes on the display.
- Push the “Up” or “Down” button to set up the desired time
(from 0 to 30 min.)
When the time setting is complete, push “Set” one time
and the “ES”abbreviation will flashes on the display.
- Push the “Up” or “Down” button to select the programs
“P1 or P2 or P3”.
Confirm the program with the “Set” button.
- Push the “Up” or “Down” button to select the power.
- At the end of the program the device will automatically
switch off.
- To return to the Ultrasounds mode, keep pushing the “Set”
button for 2 seconds.
MODE OF USE MENS TYPE PROGRAMS
ATTENTION: to carry out the MENS treatment it is
necessary to use the small cable with two adhesive
electrodes, together with the metal part of the treatment
head.
These applications are for medical aim, therefore they have
to be carried out only with medical personnel approval.
The microcurrents use currents which voltage is included
between 10 and 500 µA (microampere, that is a millionth of
one ampere). Numerous researches proved that the
To Next Page
Loading...
Need help?
General
