4
BASIC FUNCTION (START/STOP/RESET)
Example:
Start: Press push button A.
Stop: To stop the timing, press push
button A once more and read the
chronograph hands: 1 h/20 min/38 sec.
Zero positioning:
Press push button
B. (The chronograph hands will be reset
to their zero positions.)
* Pull out the crown to position III (the
watch stops).
Turn the crown until the correct date
appears.
** Continue to turn the crown until the
correct time of 8:30 PM appears.
Push the crown back into position I.
Please note: * To set your watch to the exact
second, please refer to the chapter entitled
«SETTING THE TIME».
** Please observe the AM/PM clock rhythm.
To Next Page
Loading...