GLOCK PRECISION - Adjusting the Chronograph Hands to Zero Position; Adjusting the Second Counter Hand; Adjusting the Hour Counter Hand at 5030.D (Position 6 h); Adjusting the Minute Counter Hand (Position 9 h)

6
Adjusting the hour counter hand at 5030.D (position 6h)
Single step A 1 x short
Continuous A long
Adjusting the minute counter hand (position 9h)
Single step
A 1 x short
Continuous
A long
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
Adjusting the second counter hand
Single step A 1 x short
Continuous A long
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g., following a battery change).
Pull out the crown to position III (all
chronograph hands are in their correct or
incorrect zero position).
Keep push buttons A and B
depressed
simultaneously
for at least 2 seconds (the
second counter hand rotates by 360°
corrective mode is activated).
Returning the crown to position I
Termination of the chronograph hands adjustment (can
be carried out at any time).
Adjusting the next hand B
Adjusting the next hand B