Gloria MULTIJET - User Manual

Other manuals for Gloria MULTIJET

User Manual96 pages

Questions and Answers

M
Micheal SheaSep 9, 2025
What to do if battery charging display continuously lit, but charging is not possible in Gloria Tools?
- E
  Eduardo WilsonSep 9, 2025
  If the battery charging display is continuously lit, but charging isn't happening on your Gloria Tools, check the following: * Ensure the battery is correctly inserted into the charger. * Clean the battery contacts by plugging and unplugging the battery several times. * The battery may be faulty and needs replacement.
M
martinezwhitneySep 12, 2025
What to do if there is water in my Gloria Tools device?
- Y
  ysheltonSep 12, 2025
  If there's water inside your Gloria Tools device, the cause might be: * Use during rain. Hold the device vertically to allow water to drain out of the discharge openings. * The device fell into water. Allow the device to dry out for 24 hours. * Housing damaged. Contact customer service.
E
Erin RobinsonSep 14, 2025
Why is my Gloria Tools device leaking?
- R
  reynoldsdavidSep 14, 2025
  Slight leaks with droplets at the connections arise due to the design and are not a defect. Check the connections and any screw fittings and tighten them up as required.
J
James GouldSep 16, 2025
Why does the battery charging display not light up on my Gloria Tools?
- J
  Jonathan CookSep 16, 2025
  If the battery charging display doesn't light up on your Gloria Tools, it could be due to: * The charger's mains plug not being fully plugged in. Ensure it's fully inserted into the mains outlet. * A defective mains outlet, power cable, or charger. Check the mains voltage and, if necessary, have the charger inspected by an authorized repair shop for Gloria electrical power tools.