Glow-worm cxi User Manual

Glow-worm,
Nottingham Road, Belper, Derbyshire. DE56 1JT
General/Sales enquiries:
Tel: (01773) 824639 Fax: (01773) 820569
0020008566A.01.05
INSTALLERS INFORMATION
cxi & sxi
FLUE SYSTEM
Tel: (01773) 828100
Fax: (01773) 828070
These instructions are supplementary to the
literature supplied with the boiler and are for use
with :
Top Outlet Horizontal Concentric Flue Packs -
A2043600 and A2043400
Refer to diagram 1.
If you have been supplied with Standard
horizontal flue pack - Pt. No. 2000460360 or Pt.
No. A2037300, you will find the instructions for
the preparation and installation of these flues
within the literature supplied with your boiler.
12841
Diagram 1
TELESCOPIC
TERMINAL ASSEMBLY
SEALING
COLLAR
SEALING
COLLAR
SECURING
COLLAR
FLUE
ELBOW
GASKET
(fitted)
SEALING
TAPE (telescopic only)
Top Outlet Horizontal Concentric Flue Packs:
A2043600 Horizontal telescopic flue pack.
A2043400 Standard horizontal flue pack.
STANDARD
TERMINAL ASSEMBLY
SCREW x 1
SCREW x 2
SCREW x 2
SCREW x 4

Glow-worm cxi Specifications

General

Brand	Glow-worm
Model	cxi
Category	Boiler
Language	English

Summary

2 Flue Location and Ventilation

2.1 Flue Options

Describes the use of standard and telescopic horizontal flues for boiler installations.

2.2 Flue Length

Details maximum permissible horizontal flue length and condensate fall requirements.

2.3 Terminal Position

Minimum siting dimensions for the terminal from obstructions and ventilation openings.

2.4 Terminal Guard

Requirement for and positioning of a terminal guard to prevent contact or damage.

3 Installation Preparation

3.1 Wall Template

Guidance on using the wall template for positioning flue and fixing holes.

3.2 Flue Hole Cutting

Instructions for drilling the correct diameter flue holes for various flue types.

3.4 Fixing Jig and Hanging Bracket

Steps for securing the fixing jig wall brackets and jig plate to the wall.

4 Flue Preparation Telescopic and Standard Flue

4.1 Flue Components

Details components supplied in standard and telescopic kits and available accessories.

4.2 Flue Length

Guidance on measuring and cutting flue lengths for rear and side telescopic/standard flues.

4.2 Flue and Air Ducts

Instructions for cutting and preparing telescopic flue ducts and standard flue components.

4.3 Flue Assembly

Steps for assembling the flue elbow, air duct, and terminal with securing collars.

4.4 Flue Attachment To Boiler

Procedure for securing the flue elbow to the boiler and connecting the flue assembly.

5 Servicing

Important Notes on Servicing

Recommendations for continued efficient and safe operation, and legal requirements for servicing.

5.1 General Servicing

Measuring combustion products using an analyser test point and investigating flue gas issues.