What to do if my Glow-worm Thermostat displays a boiler fault (e.g., F.33)?
If your Glow-worm Thermostat displays a boiler fault code (like F.33), try resetting the boiler by selecting 'Reset' and then 'Yes'. If the fault message continues to appear after the reset, contact a qualified technician for assistance.
How to unlock the buttons on a Glow-worm Thermostat?
If the button lock is active on your Glow-worm Thermostat, preventing you from changing settings, press the button on the top right of the system control for approximately one second to deactivate the button lock.
What to do if the Glow-worm Thermostat display remains dark?
If the display on your Glow-worm Thermostat remains dark, it might be due to a software error. First, try pressing and holding the button on the top right of the system control for more than five seconds to force a restart. If that doesn't work, switch off the main power switch to all heat generators for about one minute, and then switch them back on. If the display is still dark after these steps, contact a qualified technician.
What to do if I don't understand the language on my Glow-worm MiSet SRT 380 Thermostat display?
If you do not understand the language set on your Glow-worm Thermostat display, here’s how to change it: 1. Press the button twice. 2. Select the last menu item (SETTINGS) and confirm by pressing the button. 3. Under SETTINGS, select the second menu item and confirm by pressing the button. 4. Select the language you understand and confirm by pressing the button.
General| Mounting | Wall-mounted |
|---|---|
| Display | LCD |
| Battery Type | 2 x AA |
| Programming Options | 7-day programming |
| Compatibility | Glow-worm boilers |
| Control Method | Wireless |
| Temperature Range | 5°C to 35°C |
To Next Page
