2 Product description
8 Operating and installation instructions MiSet 0020288229_00
2.10 Operating and display functions
Note
The functions described in this section are not available for all system configura-
tions.
To call up the menu, press twice.
2.10.1 CONTROL menu item
MENU → CONTROL
→ Zone
→ Name of zone Changing the name Zone 1, which was set at the factory
→ Mode: → Manual → Desired temperature: °C
Uninterrupted retention of the desired temperature
→ Time-contr. → Weekly planner
→ Set-back temperature: °C
Weekly planner: Up to 12 time periods and desired temperatures can
be set per day
The competent person sets how the heating installation behaves out-
side of the time period in the Set-back mode: function.
In Set-back mode: means:
– Eco: The heating is switched off outside of the time periods. Frost
protection is activated.
– Normal: The set-back temperature applies outside of the time peri-
ods.
Desired temperature: °C: Applies within the time periods
→ Off
Heating is switched off, domestic hot water continues to be available,
frost protection is activated
→ Absence → All: Applies only to any zones within the specified time period
→ Zone: Applies for the selected zone in the specified time period
Heating and domestic hot water mode is switched off; frost protection
is activated
→ Domestic hot water
→ Mode: → Manual → DHW temperature
Uninterrupted retention of the domestic hot water temperature
→ Time-contr. → Domestic hot water weekly planner
→ DHW temperature: °C
→ Circulation weekly planner
To Next Page
Loading...
Need help?
General
