Product description 2
0020288229_00 MiSet Operating and installation instructions 9
MENU → CONTROL
→ Mode: Domestic hot water weekly planner: Up to three time periods can be
set per day
DHW temperature: °C: Applies within the time periods
Domestic hot water mode is switched off outside of the time periods
Circulation weekly planner: Up to three time periods can be set per
day
The circulation pump pumps hot water to the draw-off points within the
time periods
Outside of the time periods, the circulation pump is switched off
→ Off
Domestic hot water mode is switched off
→ DHW boost Heating up the water in the cylinder once
→ Ventilation boost Heating mode is switched off for 30 minutes.
→ Time programme
assistant
Programming of the desired temperature for Monday–Friday and Sat-
urday–Sunday; the programming applies for the time-controlled Heat-
ing, Domestic hot water and Circulation functions.
Overwrites the weekly planner for the Heating, Domestic hot water
and Circulation functions.
→ Sytem off Installation is switched off. Frost protection remains active.
2.10.2 INFORMATION menu item
MENU → INFORMATION
→ Current temperatures
→ Zone
→ DHW temperature
→ Water pressure: bar
→ Burner status:
→ Control elements Explanation of the control elements
→ Menu introduction Explanation of the menu structure
→ Competent person contact info
→ Serial number
2.10.3 SETTINGS menu item
MENU → SETTINGS
→ Installer level
→ Enter access
code
Access to the installer level, factory setting: 00
→ Competent per-
son contact info
Entering contact details
→ Service date: Enter the next service date for a connected component, e.g. heat gen-
erator
→ Fault history Faults are listed in chronological order
To Next Page
Loading...
Need help?
General
