6
GlowLightControl.com
Optional Steps
9. Attach the Eggcrate Grid. The grid attaches using the Velcro touch
sensitive strips running along the inside edge of the bowl.
A. Align the shape carefully to match the perimeter shape for the
strongest feathering.
B. Press the surfaces rmly to seal the grid for spill control and drama.
10. Close‘r up!
A. Remove any diusers that are attached.
B. Reach into the center of the hub and hold onto the EZ Lock knob.
C. Press the wide side button into the center while holding the softbox
rmly. The EZ Lock mechanism is released, and the structure relaxes.
D. Complete the closure by bringing the spokes and sections together,
as if closing an umbrella. Bind the closed softbox with the Velcro
strap, slip the bundle into the zippered case and call it a day.
To Next Page
Loading...
