GLOW EZ Lock Octa Quick Softbox - Specifications and Mount Adapters; Speedring Mount Adapter Insert; Product Specifications

7
GlowLightControl.com
Optional Beauty Dish Adapter Insert Ring
Specications GLSBEZ25OCTA GLSBEZ36OCTA GLSBEZ48OCTA
Diameter open 25” / 63.5cm 36” / 91.5cm 44” / 112cm
Depth open 11.75” / 30cm 19.25” / 49cm 26” / 66cm
Weight 1lb 3.5oz / 552g 2lb 1.5oz / 952g 2lb 12oz / 1.25kg
Dimensions closed 15x6”/38x15.3cm 25x6”/63.5x15.3cm 34x6”/86.4x15.3cm
Speedring Mount Adapter Insert
The EZ Lock octa quick softbox includes an installed 130mm Bowens mount
insert for use on Bowens mount strobes.
To change the insert ring to t onto a dierent ash mount:
1. Stretch the fabric in the rear of the softbox to reveal one of the
tab screws.
2. Unscrew that one entirely and set it aside. You only need to loosen the
two adjoining screws enough for the insert to slip out of the tabs.
3. Remove it and replace the insert with your mount version.
4. Put to removed screw back into place and tighten all the screws.
SPECIFICATIONS
Materials Reinforced Fabric, Aluminum Rods, Aluminum Ring
Finish Silver interior, black matte exterior, custom trim
Mount Interchangeable Bowens speedring supplied (Insert Size 130mm)
Sections 8
Removable Front Diusor Yes
Removable Interior Bae Yes
Accepts Grids Yes (included)
Speedring 130mm insert
No accessories are included in the weights or measurements
130mm