GLOW EZ Lock Octa Quick Softbox - Attach the Inner Diffuser; Attach the Outer Diffuser

5
GlowLightControl.com
Optional Steps
You can ip the deector disk
convex side out, creating an
alternate light distribution.
E. For ease of access to the Deector Disk after the Octa Quick Soft-
box is complete or in use, a zippered slit opens to reveal the assem-
bly. Now, you can change the orientation or remove it completely.
Close the zipper to keep the light in the softbox.
7. Attach the inner diuser. The inner layer can be used with or without
the deector disk. The more diusion, the less dramatic the Octa Quick
Softbox wrap. The fabric snaps onto the interior elastic tabs that are on
each rod spoke.
8. Attach the outer diuser. Join the outer diusion fabric to the Velcro
strips that line the inner perimeter of the softbox. Again, the deector
disk, as well as the inner diuser, can be used together to maximize the
softness of the ash.
A. Unfold the diusion material and align the diuser’s corners
with the outside junctions of the opened Octa Quick Soft-
box.
B. Press the strips rmly to seal o light leaks.