Unbox your Glowforge Air Filter
Locate your Glowforge Air Filter.
Your Glowforge Air Filter must be on a flat surface, like the floor. It needs to be positioned
so that the 8 foot exhaust hose can connect to the back of your Glowforge while making no
more than three 90-degree bends.
Your Glowforge Air Filter blows air out, so ensure that there are no obstructions within two
inches of the vents on either side.
Vents are on two opposite sides
Unseal your Glowforge Air Filter box.
Carefully cut tape sealing the top of your Glowforge Air Filter box and open it. Remove the
power cord and the top piece of foam.
Copyright Glowforge, Inc. 2020 7
To Next Page
Loading...