To Next PageTo Next Page
Need help?Do you have a question about the Glunz & Jensen MultiLine 950 and is the answer not in the manual?
Details on the types of film and paper the processor can handle.
Provides dimensions, film width, length, thickness, and developer time.
Specifies the recommended temperature ranges for developer, fixer, and dryer.
Details voltage, phase, frequency, and amperage requirements.
Provides physical dimensions (width, depth, height) for each processor model.
Ensures requirements are met before installation to avoid delays and issues.
Specifies room temperature and humidity needed for proper function.
Defines the necessary free space around the machine for servicing and access.
Details requirements for the water tap and its distance to the machine.
Details the need for a main power outlet and its recommended distance.
Details how to cut a wall opening and seal it for light-tight operation.
Explains connecting an external exhaust system to remove chemical fumes.
Covers main power outlet requirements for technicians.
Details the function of developer and fixer sections, including tanks, heaters, and pumps.
Explains the function of the wash section for removing residual chemicals.
Describes how the dryer section removes moisture from the film.
Describes the motor and roller system that moves film through the processor.
Describes the main components like electronics drawer, switches, and control box.
Explains the main control board, its functions, buttons, and display.
Details the OFF, Stand-by, and Process modes (Automatic/Continuous).
Step-by-step guide for preparing and starting the processor for the first time.
Steps for daily preparation, including checking chemicals and starting the machine.
Explains how to select and set up the four available processing programs.
Details the procedure for feeding film using the standard feed table.
Step-by-step guide for selecting and changing parameter values using the control panel.
Details the steps for safely turning off and preparing the processor for inactivity.
Describes the control box location, connection, and purpose.
Lists the main buttons, indicators, and functions of the control box.
Describes situations causing the WAIT lamp to light up, indicating processing status.
Explains how to select programs for different developing times and replenishment rates.
Emphasizes scheduled maintenance for equipment reliability and processing quality.
Steps for daily cleaning of feed table, wash tank, replenishment containers, etc.
Details weekly tasks like cleaning developer and wash tank rollers and lids.
Covers monthly cleaning of fixer rollers, dryer rack, gears, bearings, and scavenger fan.
Procedure for authorized personnel to replace fuses safely.
Methods to check developer effectiveness and adjust replenishment rates.
Methods to check fixer effectiveness and adjust replenishment rates.
Provides guidance on using the troubleshooting section and references.
Diagnoses and provides remedies for common processor malfunctions.
Addresses common problems related to film quality and appearance.
General information about identifying and ordering spare parts.
Instructions on how to order spare parts, including necessary information.
Lists part numbers and specifications for the tank section components.
Lists part numbers and specifications for the dryer rack components.
Lists part numbers and specifications for the electronics drawer components.
Provides supplementary technical data like processor weight.
Overview of service information, parameter levels, and access warnings.
Explains the three levels of parameters and how to access them.
Lists and describes parameters for European region settings.
Lists and describes parameters for USA region settings.
Detailed explanations for various operational and service parameters.
Explains how to calculate replenishment settings using a provided formula.
Details test programs available for servicing purposes on the PCB GCB.
Guide for technicians on adjusting parameters and checking temperatures.
General supplementary information covering processor models.
Instructions on ordering spare parts, referencing iso-metric drawings and part numbers.
Explains how to connect replenishment hoses, indicating color codes.
States that electrical diagrams for the processors are provided on the next pages.
General| Brand | Glunz & Jensen |
|---|---|
| Model | MultiLine 950 |
| Category | Printer |
| Language | English |
