Exterior
Lamps
I
Your lamp switch is on the driver’s side of the
instrument panel.
Rotate the knob toward the right to the parking lamp
symbol
to
turn on the following:
Parking Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Rotate the knob toward the right to the master lighting
symbol to turn on all the lamps listed as well as
the headlamps.
Rotate the knob toward the left to
OFF
to turn
off
your lamps.
Rotate the dial next to the knob up to adjust your
instrument panel lights. Rotate the dial up to the first
notch for full intensity. If you rotate the dial to the
second notch, your interior lamps will come on.
Rotate the dial next to the lamp switch down to dim
your
instrument panel lights.
Headlamps
You can switch your headlamps from high to low beam
by pulling the multifunction lever toward you.
A
circuit breaker protects your headlamps. If you have
an electrical overload,
your
headlamps will flicker on
and off. Have your headlamp wiring checked right away
if this happens.
Headlamps On Reminder
A
reminder tone will sound when your headlamps or
parking lamps are turned on and your ignition is in the
OFF,
LOCK or ACCESSORY position.
To
turn the tone
off,
turn the switch to
OFF.
To Next Page
Loading...
