Replacing
the
Rear
Seats
To
replace the rear seats,
do
the following:
3
2.
Pull the seat down to latch the rear retainers. Make
sure the seat is locked in by pulling up and down
on
the seat.
1.
Lower the seat into position. Make sure the front
retainers are hooked onto the anchor pins.
3.
To
raise the seatback, unlock the seatback latch by
pushing up on the latch release lever at the right rear
of
the seat, while pushing down on the upper edge
of
the seatback. Move the seatback into the upright
position. Make sure the seatback is locked when it is
back in the upright position.
1-11
To Next Page
Loading...
