Battery Replacement
Under normal use, the battery in your remote keyless
entry transmitter should last about two
years.
You can tell the battery is weak if the transmitter won't
work at the normal range in any location. If you have to
get
close
to your vehicle before the transmitter works,
it's probably time to change the battery.
NOTICE:
When replacing the battery, use care not to touch
any of the circuitry. Static from your body
transferred to these surfaces may damage
the transmitter.
Use one Panasonic@ three-volt, type CR2032, or
equivalent battery.
Your transmitter housing snaps apart for ease in
battery replacement.
To
replace the battery:
1.
2.
3.
4.
Insert a small coin, or flathead screwdriver, to
separate the bottom
of
the transmitter
from
the top.
Remove the battery and replace it with a new one,
making sure the positive
(+)
side
of
the battery is
facing down.
Snap the top and bottom together.
Test the operation of the transmitter with your
vehicle.
If
the transmitter does not work, try
synchronizing the transmitter with the receiver.
2-9
To Next Page
Loading...
