EasyManua.ls Logo

GMC 2005 Canyon - Power Seats; Heated Seats

GMC 2005 Canyon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Acknowledge and clear a warning or
message
Press and hold the control stem for
one second.
See Section 3 of your Owner Manual.
Note: To ensure your own safety and to
protect your vehicle warranty, it’s impor-
tant not to ignore the preceding warn-
ings. Acknowledge each one and attend
to them at your earliest convenience.
Power Seats (if equipped)
On equipped vehicles, the power seat
controls are located on the outboard
sides of the front seats.
Raise or lower the front of the seat
Lift or depress the front edge of the
control (see “A” above).
Raise or lower the rear of the seat
Lift or depress the rear of the control
(see “B” above).
Move the seat forward or rearward
Move the entire control forward or
rearward.
Raise or lower the seat
Lift or depress the entire control.
Move the reclining front seatback
forward or rearward
Move the recliner control (see “C”
left) forward or rearward.
See Section 1 of your Owner Manual.
Heated Seats (if equipped)
On equipped vehicles, the lower and
back cushions of the driver and front
passenger seats can be heated.
The controls are located on the outboard
sides of the front seats. (The ignition
must be on and the safety belt buckled
for this feature to work.)
Activate the heated seats
Press the lower part of the switch to
turn the heater to the “Low” setting;
press the upper part to turn the
heater on “High.” Place the switch in
the center position to turn the heater
off.
See Section 1 of your Owner Manual.
A
B
C
Note:
In order for the passenger heated
seat to operate, the passenger safety
belt must be buckled.

Other manuals for GMC 2005 Canyon

Related product manuals