The front bumper lower air dam is held in place by a
series of push-pins located around the lower edge of
the front bumper. The push-pins are accessible
from underneath the front bumper.
The following steps must be performed on each of
the push-pins to remove the air dam:
1. Insert a tool into the
push-pin slot and pull
downward until the
push-pin snaps loose.
2. While continuing to
pull downward on
the push-pin,
squeeze and turn the
expandable end of
the push-pin with a
tool until it releases
from the retainer.
4-17
To Next Page
Loading...
