The following information will tell you next how to
use the jack and change a tire.
Removing the Spare Tire and Tools
The tools needed to remove the spare tire are
located in the storage compartment on the driver
side, at the rear of the vehicle.
1.
Open the jack storage compartment by squeezing
down on the latch tab and pulling the cover off.
A. Tool Bag
B.
Wing Bolt
C. Jack
2.
Remove the wing bolt (B) by turning it
counterclockwise.
3.
Push the jack (C) up out of the holding bracket.
459
To Next Page
Loading...
