A. Wing Nut
Retaining
Tool Kit
B. Tool Kit
C. Wheel Blocks
D. Jack
E. Wing Nut
Retaining Jack
1. Put the tools in the tool bag and place them in
the retaining bracket.
If your vehicle has a cover replace the cover.
2. Tighten down the wing nut.
3. Assemble the wheel blocks and jack together
with the wing nut and retaining hook.
If you have the Regular Cab, the wheel blocks
must be placed straight up and down on the
top of the jack.
4. Position the jack in the mounting bracket.
Position the holes in the base of the jack
onto the pin in the mounting bracket.
5. Return them to their original location in the
vehicle. For more information, refer to
Removing the Spare Tire and Tools on
page 578 for more information.
Spare Tire
Your vehicle may or may not have a spare tire
depending on the model. A spare tire may lose air
over time, so check its inflation pressure
regularly. See Inflation - Tire Pressure on
page 559 and Loading Your Vehicle on page 425
for information regarding proper tire inflation
and loading your vehicle. For instruction on how to
remove, install or store a spare tire, see
Removing the Flat Tire and Installing the Spare
Tire on page 582 and Storing a Flat or Spare Tire
and Tools on page 592.
Extended Cab
596
To Next Page
Loading...
