10-84 Vehicle Care
3. Reinstall the wing nut to
secure the bag to the
vehicle.
To store the jack and wheel blocks:
Regular/Extended Cab
A. Jack
B. Wheel Blocks
C. Wing Nut
1. Install the wheel blocks (B) first.
2. Reinstall the wing nut (C) by
turning it clockwise to secure the
wheel blocks to the vehicle.
3. Lower the jack (A) all the way
and insert the jack into the
bracket.
4. Raise the jack by turning the
handle clockwise to secure the
jack within the bracket.
5. Put the cover in position and
insert and tighten the wing nut to
secure it.
Crew Cab
A. Jack
B. Wheel Blocks
C. Wing Nut
1. Attach the wheel blocks (B) to
the jack (A) with the wheel block
retainer and the wing nut (C).
2. Reinstall the jack and wheel
block assembly in the mounting
bracket. Be sure to position the
holes in the base of the jack
onto the pins in the mounting
bracket.
To Next Page