Seats and Restraints 3-9
Rear Seats
Rear Seats
(Extended Cab)
On extended cab models, there
may be forward folding seats in the
rear area.
To fold a rear seat cushion from
the stored position to the sitting
position, pull the front of the seat
cushion down completely.
The rear seat storage compartments
must be closed before folding the
seat down. See Rear Storage on
page 4‑2.
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle the
safety belts and return them to
their normal stowed position
before folding a rear seat.
To store the seat:
1. Secure the safety belt buckle to
the inboard side of the seat with
the hook and loop fastener (A),
so that it does not move when
not in use.
2. Push the entire seat up until it is
flush with the trim panel.
To Next Page
Loading...
