EasyManua.ls Logo

GMC 2011 Yukon Denali - Replacing the Engine Air Cleaner;Filter

GMC 2011 Yukon Denali
520 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (17,1)
GMC Yukon Denali/Yukon XL Denali Owner Manual - 2011
Vehicle Care 10-17
Replacing the Engine
Air Cleaner/Filter
1. Locate the air cleaner/filter
assembly . See Engine
Compartment Overview on
page 106.
2. Loosen the four screws on the
cover of the housing and lift up
the cover.
3. Remove the engine air
cleaner/filter from the housing.
Care should be taken to
dislodge as little dirt as possible.
4. Clean the engine air
cleaner/filter sealing surfaces
and the housing.
5. Inspect or replace the engine air
cleaner/filter.
6. Reinstall the cover and tighten
the screws.
{
WARNING
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.

Table of Contents

Related product manuals