10-40 Vehicle Care
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back-up Lamp
To replace one of these bulbs:
1. Remove the two screws from the
taillamp assembly.
2. Remove the taillamp assembly
by pulling rearward until the two
outboard pins of the taillamp
disengage from the vehicle.
3. Press the release tab,
if equipped, and turn the socket
counterclockwise to remove it
from the taillamp assembly.
4. Pull the old bulb straight out
from the socket.
5. Press a new bulb into the
socket, insert the socket into the
taillamp assembly and turn the
socket clockwise into the
taillamp assembly until it clicks.
6. Reinstall the taillamp assembly.
To Next Page
Loading...
