14
Cruise Control
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the switch up to resume a
set speed.
When the system is active, rotate the
switch up to increase speed.
SET– Set/Coast
When the system is active, rotate the
switch down to decrease speed.
Cancel
Press to cancel the cruise control but retain
the set speed in memory.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
Setting Cruise Control
1. Press the ON/OFF button. The
Cruise Control symbol will illuminate in
white in the instrument cluster.
2. When traveling at the desired speed,
rotate the SET– switch down to set the
speed. The symbol will illuminate in
green in the instrument cluster.
Forward Collision Alert/Lane Departure WarningF
Forward Collision Alert
When approaching a vehicle directly ahead
too quickly, a visual alert ashes on top of
the instrument panel and beeps sound.
Press the Collision Alert button on
the left side of the steering wheel to set
the alert timing.
Lane Departure Warning
When crossing a detected lane marking without using a turn signal, a visual alert ashes
on top of the instrument panel and beeps sound.
Press the Lane Departure Warning button on the left side of the steering wheel to
turn the system on or off.
See Driving and Operating in your Owner Manual.
F Optional equipment
To Next Page
Loading...
Need help?
General
