Know your product
This drill is mainly used for drilling in wood or metal sheet
and screwdriving. Use machine only for intended applications.
All other applications are expressly ruled out.
1. Keyless chuck
2. Torque collar
3. Forward/reverse switch
4. Trigger with variable speed control
5. Battery pack release
6. Rechargeable battery pack
7. Adaptor
Unpacking
Due to modern mass production techniques, it is unlikely that
your GMC Power Tool is faulty or that a part is missing. If you
find anything wrong, do not operate the tool until the parts
have been replaced or the fault has been rectified. Failure to
do so could result in serious personal injury.
5
1
7
2
4
3
5
6
To Next Page
Loading...
