Getting to Know Your Envoy
6
Dual Automatic Climate Control
(if equipped)
Manually select desired airflow
source
• Press and release the MODE button
until the desired source is indicated
on the display. Mode selections
include VENT, BI-LEVEL, FLOOR
and DEFOG/DEFROST.
Manually raise or lower fan speed
• Press the upper or lower portion of
the FAN control ( ) button.
Manually adjust the dual temperature
controls
• Use the knob on the left-hand side of
the climate control panel to adjust the
temperature on the driver side of the
vehicle. Use the right-hand knob to
adjust the temperature on the pas-
senger side of the vehicle as well as
the second row.
• To match and link the passenger-side
temperature to the driver’s, press and
hold the AUTO button for three
seconds.
Recirculate interior air and prevent
outside air from entering your vehicle
• Press the RECIRCULATE ( )
button.
This feature can be activated while in
the VENT or BI-LEVEL mode, but not in
DEFOG, DEFROST or FLOOR mode.
Clear the windshield and front side
windows of fog or frost more quickly
• Press the FRONT button.
Clear the rear glass of fog or frost
more quickly, and activate the heated
outside rearview mirrors (if equipped)
• Press the REAR button.
See Section 3 of your Owner Manual.
To Next Page
Loading...
