EasyManua.ls Logo

GMC MOC6L - User Manual

GMC MOC6L
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
6LT
OIL-LESS
COMPRESSOR
MOC6L
INSTRUCTION MANUAL
Black
Cyan
Magenta
Yellow
Code: MOC6L IM
Date: 070620 Edition: 02 Op: MM

Table of Contents

Questions and Answers

  • S
    Sarah MontgomeryJul 30, 2025
    What to do if my GMC MOC6L Air Compressor has insufficient pressure?
    • J
      Joshua NguyenJul 30, 2025
      If your air compressor has insufficient pressure, several factors could be the cause. The motor might be running too slow, or there could be a leak in the safety valve or pipe. Other potential issues include a damaged gasket, valve seat, piston ring, or cylinder. Also, check if the regulator is incorrectly adjusted and set it correctly. For the other issues, it is best to use an authorised service centre to check and repair.
  • D
    Debra WalkerAug 9, 2025
    Why is my GMC MOC6L Air Compressor making abnormal noises?
    • K
      Kelly SullivanAug 9, 2025
      Abnormal noise or vibration in your air compressor can stem from several causes. A part may be loose, or there could be a foreign body inside the main compressor. The piston might be connecting with the valve seat, or moving parts could be excessively worn. If any of these issues occur, use an authorised service centre to check and repair or replace parts as needed. If the piston is connecting with the valve seat, use an authorised service centre to increase the size of the gasket.
  • A
    Amy WardAug 18, 2025
    What to do if main compressor is sticking on GMC Air Compressor?
    • M
      Michael WilliamsAug 18, 2025
      If the main compressor is sticking, it could be due to moving parts damaged by heat. In this case, use authorised service centre to check crankshaft, bearings, con rod, piston rings, etc and replace where necessary. It also could be caused by moving parts damaged or blocked by a foreign particle.

Summary

Warning Labels Explained

Introduction

Environmental Protection

Guidelines for recycling and environmentally safe disposal of materials.

Description of Symbols

Product Specifications

General Safety Rules

Work Area Safety

Ensures a clean, well-lit, and safe working environment, free from hazards.

Electrical Safety

Precautions for safe use of power tools, including plug matching and avoiding water contact.

Personal Safety

Guidelines for operator alertness, proper attire, and use of safety equipment.

Power Tool Use and Care

Operation and Maintenance Practices

Rules for proper tool usage, maintenance, and handling of accessories.

Service and Repair

Instructions for servicing power tools by qualified personnel with identical parts.

Additional Safety Rules for Air Compressors

Unpacking and Components

Know Your Product: Component Identification

Starting the Air Compressor

Operating the Air Compressor

Stopping the Air Compressor

Assembly of Included Accessories

Operation of the Quick Change Blow Gun

Connecting Air Accessories

Inflation Needle Connection

Steps to attach the inflation needle to the quick change blow gun.

Tapered Inflation Fitting Connection

Steps to attach the tapered inflation fitting to the quick change blow gun.

Connecting the Tyre Inflator

Troubleshooting Common Issues

Maintenance and Inspection

Daily Maintenance Tasks

Procedures for draining condensation and checking the safety valve daily.

General Inspection Procedures

Regular checks for tight screws and cordset condition.

Cleaning and Power Cord Maintenance

Tool Cleaning Procedures

Instructions for cleaning air vents, removing dust, and cleaning the compressor body.

Power Cord Care and Repair

Guidance on maintaining and replacing the power cordset by an authorized service center.

GMC Customer Assistance and Support

GMC MOC6L Specifications

General IconGeneral
BrandGMC
ModelMOC6L
CategoryAir Compressor
LanguageEnglish

Related product manuals