I
Lower
Raise
H
/1
A.
Hoist Assembly
B.
Ratchet
C. Jack Handle
D.
Hoist Shaft
E.
Valve Stem, Pointed
Down
E
Spare Tire
G.
Retainer
H.
Hoist Cable
Follow these instructions to lower the spare tire:
1.
2.
3.
4.
One side
of
the ratchet has an
UP
marking. The other
side
has
a
DOWN
marking. Assemble the ratchet
to the hook near the end
of
the jack handle (as
illustrated) with the
DOWN
marking facing
you.
Insert the, other end through the hole in the rear
bumper
and
into the hoist shaft.
Turn the ratchet
to
lower the spare tire. to the ground.
Continue to turn the ratchet until the spare tire can be
pulled out from under the vehicle.
When the tire has been lowered, tilt the retainer at
the end
of
the cable
so
it can be pulled up through
the wheel opening,
Put the spare tire near the flat tire.
5-24
To Next Page