To replace the battery:
Synchronization
1.
Insert a small coin, or flathead screwdriver, to
separate the bottom of the transmitter from
the
top.
making sure the positive
(+)
side
of
the battery is
facing down.
2.
Remove the battery and replace
it
with a new one,
3.
Snap the top and bottom together.
4.
Test the operation of the transmitter with your
vehicle.
If
the
transmitter does not work, try
synchronizing the transmitter
with
the
receiver.
Synchronization may be necessary due to the security
method used
by
this system. The transmitter does
not
send the same signal twice to the receiver. The receiver
will
not respond to
a
signal
it
has been sent previously.
This prevents anyone from recording and playing back
the signal from the transmitter.
To
resynchronize your transmitter, stand close to your
vehicle and simultaneously press and hold the
LOCK
and
UNLOCK
buttons on the transmitter for at least
five seconds. The door locks should cycle to confirm
synchronization.
If
the locks do not cycle, see your
dealer for service.
Theft
Vehicle theft is big business, especially in some cities.
Although your vehicle has a number of theft-deterrent
features, we know that nothing we put on it can make
it
impossible
to
steal. However, there are ways you
can help.
To Next Page