Need help?Do you have a question about the GMC TS1800 and is the answer not in the manual?
Never disable safety devices; replace damaged ones promptly.
Steps for safely removing the tool and its parts from the carton.
Protect surface, remove/replace base plate, remove motor foam.
Labels and descriptions of the table saw's components.
Locating and understanding key controls like fences and adjustment knobs.
Connecting legs and braces to construct the stand.
Aligning holes and using bolts to firmly attach the saw to the stand.
Steps to install the riving knife correctly for kickback prevention.
Instructions to attach the blade guard for user protection.
Setting the blade height using the adjustment handle and locking knob.
Setting the blade angle for bevel cuts using the adjustment knob.
Setting the rip fence to the desired width using its scale.
Placing the gauge in the table slot and setting the desired angle.
Guidance on using these accessories to keep hands away from the blade.
Explains kickback and its causes to prevent serious injury.
To Next Page
General
