GMI D1054S User Manual

D1054 - SIL 2 Repeater Power Supply and Trip Amplifiers ISM0067-18
D1054S
INSTRUCTION & SAFETY MANUAL
SIL 2 Repeater Power Supply
and Trip Amplifiers
Din-Rail Model D1054S

GMI D1054S Specifications

General

Brand	GMI
Model	D1054S
Category	Repeater
Language	English

Summary

Characteristics

General Description

Provides a fully floating DC supply for energizing conventional 2 wires 4-20 mA transmitters.

Function

1 channel I.S. analog input for 2 wires loop powered or separately powered transmitters.

Signalling LEDs

Indicates power supply, burnout, and alarm status.

Configurability

Totally software configurable, no jumpers or switches.

Technical Data

Ordering Information

Front Panel and Features

Terminal Block Connections

Parameters Table

Function Diagram

Functional Safety Manual and Application

Application for D1054S, active input and 4-20 mA analog current output

Details the application of D1054S for active input and 4-20 mA analog current output.

Safety Function and Failure behavior

Describes the safety function and failure modes of the D1054S module.

Failure rate table

Presents failure rates (FIT) for different failure categories of the D1054S module.

PFDavg vs T[Proof] table

Shows PFDavg values for different proof test intervals for SIL determination.

SC 2: Systematic capability SIL 2

States the Systematic Capability level as SIL 2 for the D1054S module.

Functional Safety Manual and Application

Application for D1054S, passive input and 4-20 mA analog current output

Details the application of D1054S for passive input and 4-20 mA analog current output.

Safety Function and Failure behavior

Describes safety function and failure behavior for the passive input application.

Failure rate table

Presents failure rates (FIT) for the passive input application.

PFDavg vs T[Proof] table

Shows PFDavg values for different proof test intervals for passive input SIL.

SC 2: Systematic capability SIL 2

Confirms Systematic Capability SIL 2 for the passive input application.

Functional Safety Manual and Application

Application for D1054S, active input and 1002 architecture of alarm trip amplifiers with relay outputs for NE load

Details the application for active input, 1002 alarm architecture with relay outputs for NE load.

Safety Function and Failure behavior

Describes safety function and failure behavior for 1002 alarm architecture.

Failure rate table

Presents failure rates (FIT) for the 1002 alarm architecture.

PFDavg vs T[Proof] table

Shows PFDavg values for different proof test intervals for 1002 alarm SIL.

SC 2: Systematic capability SIL 2

Confirms Systematic Capability SIL 2 for the 1002 alarm architecture.

Functional Safety Manual and Application

Application for D1054S, passive input and 1002 architecture of alarm trip amplifiers with relay outputs for NE load

Details the application for passive input, 1002 alarm architecture with relay outputs for NE load.

Safety Function and Failure behavior

Describes safety function and failure behavior for passive input, 1002 alarm architecture.

Failure rate table

Presents failure rates (FIT) for the passive input, 1002 alarm architecture.

PFDavg vs T[Proof] table

Shows PFDavg values for different proof test intervals for passive input, 1002 alarm SIL.

SC 2: Systematic capability SIL 2

Confirms Systematic Capability SIL 2 for passive input, 1002 alarm architecture.

Testing Procedure at T-proof

Test for D1054S (analog current output)

Details proof test procedures for the analog current output functionality.

Test for D1054S (for each alarm trip amplifier with relay output)

Details proof test procedures for alarm trip amplifier relay outputs.

Installation

Warning

Operation

Start-up

PPC1090 Operation

PPC1090 Configuration

Step-by-step guide to configure the D1054S using the PPC1090 configurator.

INPUT SECTION

OUTPUT SECTION

ALARM SECTION