GMI D5096S User Manual

D5096S - 5 A SIL 3 NO contact Relay Out Module for NE or F&G/ND Load with open/short circuit diagnostic G.M. International ISM0301-5
5 A SIL 3 NO contact Relay Output Module
for NE or F&G/ND Load,
with open/short circuit diagnostic
DIN-Rail and Termination Board, Model D5096S
D5096S
INSTRUCTION MANUAL

GMI D5096S Specifications

General

Contact Configuration	DPDT
Contact Form	2 Form C
Coil Voltage	24VDC
Contact Rating	10A 250VAC/30VDC
Ambient Temperature	-40°C to +70°C
Insulation Resistance	1000MΩ min at 500V DC
Dielectric Strength	1500V AC for 1 min

Summary

Instruction Manual

Characteristics

General Description

Provides an overview of the D5096S relay module for safety-related circuits up to SIL 3.

Technical Data

Details electrical and mechanical specifications, fault detection, and environmental conditions for the D5096S.

Ordering Information

Front Panel and Features

Lists key features, SIL ratings, and certifications for the D5096S relay module.

Terminal Block Connections

Function Diagram

Warning

Operation

Installation

Start-up