GMTCNT GMD Series - Default Chapter; Table of Contents

i
Table of Contents
Preface ............................................................. 3
„ Safety precautions................................................ 4
Chapter 1 BEFORE USING THE INVERTER.... 1-1
1.1 Acceptance Inspection .............................. 1-1
1.2 External Views........................................... 1-2
Chapter 2 MOUNTING AND WIRING OF THE
INVERTER........................................ 2-1
2.1 Operating Environment ............................. 2-1
2.2 Installing the Inverter ................................. 2-1
2.3 Wiring ........................................................ 2-2
2.3.1 Removing and mounting the terminal
block covers ...................................... 2-2
2.3.2 Terminal arrangement and screw
specifications .................................... 2-3
2.3.3 Recommended wire sizes ................. 2-5
2.3.4 Wiring precautions ............................ 2-7
2.3.5 Wiring for main circuit terminals and
grounding terminals .......................... 2-8
2.3.6 Wiring for control circuit terminals ... 2-11
2.3.7 Setting up the jumper switches ....... 2-18
Chapter 3 OPERATION USING THE KEYPAD . 3-1
3.1 Names and Functions of Keypad
Components .............................................. 3-1
3.2 Overview of Operation Modes ................... 3-2
Chapter 4 RUNNING THE MOTOR ...................4-1
4.1 Test Run.....................................................4-1
4.1.1 Checking prior to powering on ...........4-1
4.1.2 Powering ON and checking ...............4-1
4.1.3 Preparation before a test run
--Configuring function code data........4-2
4.1.4 Test run..............................................4-3
4.2 Operation ...................................................4-3
Chapter 5 FUNCTION CODES ............................5-1
5.1 Function Code Tables ................................5-1
Chapter 6 TROUBLESHOOTING ......................6-1
6.1 If an Alarm Code Appears on the LED
Monitor ......................................................6-1
6.2 If an Abnormal Pattern Appears on the LED
Monitor while No Alarm Code is Displayed
....................................................6-3
Chapter 7 MAINTENANCE AND INSPECTION .7-1
7.1 Daily Inspection..........................................7-1
7.2 Periodic Inspection.....................................7-1
7.3 List of Periodical Replacement Parts .........7-3
7.4 Inquiries about Product and Guarantee .....7-4
7.4.1 When making an inquiry ....................7-4
7.4.2 Product warranty ...............................7-4
Chapter 8 SPECIFICATIONS .............................8-1
8.1 Standard Models ........................................8-1
8.1.1 Three-phase 200 V class series ........8-1
8.1.2 Three-phase 400 V class series ........8-2
8.1.3 Single-phase 200 V class series .......8-3
8.2 Terminal Specifications ..............................8-7
8.2.1 Terminal functions..............................8-7
8.2.2 Connection diagram in operation
by external signal inputs ....................8-7
8.3 Protective Functions ................................ 8-11