* If the connection fails due to a weak Wi-Fi signal,
please carefully unplug and immediately re-insert the
Wi-Fi dongle back into the camera. Proceed to try the
connection again by pressing the Wi-Fi button to enter
standby mode.
2
3
Press the Wi-Fi® button on the dash camera to enter
standby mode with the voice message. (last 2 minutes)
Touch the "+" to search for your device -
use the left and right arrows scroll. Once
your device has been located select the
"Connect" button.
[★] will indicate first time
connection to the device
▶
4
The registration of the dash camera is complete.
Install the GNET application on the smartphone.
* G-net application is not available while cloud mode is on.
1
How to connect an Android smartphone
03. APPLICATION
MARTPH
NE C
NNECTI
31
Connection
To Next Page
Loading...
